Base plate 250 x 250 x 16 mm is a basic element of the Tile plastic flooring system. The surface of the tile is perforated, the underside is ribbed and interconnected by channels that ensure fast and permanent water drainage under the floor surface. Other characteristics include vibration-damping, anti-slip and anti-noise properties and dust reduction. Plastic plates are resistant to most chemicals, oils, paints, acid solvents. The recommended temperature range is -40 to +60 °C.
The delivery includes 8 pieces of connectors for connection with other segments. The advantage of the system is that if the connector is damaged, it is simply replaced and does not need to replace entire plate. 16 plates are required to cover 1 square meter.
Other system elements.
Ramp Straight 250 x 137 x 16 mm serves for finishing the floor area on the sides. Ramp ensures safe and smooth entry to the area. It is possible to simultaneously mark the edges of the surface in accordance with the safety regulations (for example combination of yellow and black). The delivery includes 6 pieces of connectors for connection with other segments.
Ramp Corner 137 x 137 x 16 mm is a complementary element for finishing the floor area at the corners, where the ramps are connected directly from two sides. The delivery includes 2 pieces of connectors for connection with other segments.
Standard – the basic soft type is designed for the movement of people and light transport equipment. Provides improved working conditions at the installation site such as increased anti-slip and anti-dust properties, vibration damping, noise reduction, thermal workplace insulation, etc.
Hard – the reinforced type is designed for more strained floors with load and handling technology, eventually parking and moving vehicles. An example of how to use the floor is a garage, industrial floor around machines, storage space, etc.